Intermec’s RFID solutions include RFID reading equipment, RFID printers and RFID labels designed to meet the business and operating demands in almost every environment. The use of RFID Smart labels and portable and fixed RFID readers enables visibility and monitoring of products, cartons and pallets at process points as they move through the warehouse and out the door. Operators do not need to scan individual bar codes thus eliminating the opportunity for human error which can create problems with misplaced, mis-identified, and mis-shipped product and result not only in customer dissatisfaction but also in many cases expensive charge-backs. This improved accuracy in shipping, receiving, and inventory control also results in a reduction in processing time and inefficient work activities. Ahearn & Soper, a PlatinumLevel Partner of Intermec, can work with you to create an RFID system that saves you time and increases accuracy in your operations.
Intermec RFID Readers
Handheld Readers
Intermec IP30 Handheld RFID Reader
The Intermec IP30 add-on passive UHF RFID handle is the new leader in handheld RFID readers. The modularity of the IP30 and the RFID-readiness of Intermec mobile computers mean the power of RFID can be literally added in a snap today or at any point in the future. The IP30 supports both in-premise and in-field applications such as warehouse operations, enterprise asset management, in-transit-visibility, direct store delivery and exceptions handling. The IP30 wroks with Intermec CK3, CN3, CN3e and CK61 Mobile Computers
Air Interface Protocols
EPCglobal UHF Gen 2, ISO 18000-6b, ISO 18000-6c
Certifications
FCC
Frequency Range
865 and 915 MHz
Antenna Ports
n/a
Digital I/O
n/a
Connectivity
n/a
Physical Characteristics
Length : 32.4 cm (12.74″) Width : 22.6 cm (8.90″) Height: 10.8 cm (4.25″)
The IF30 is a cost-effective, high performance fixed reader that reliably reads and writes UHF RFID tags in "RF noisy" environments. The IF30's receive sensitivity enables large populations of tags to be interrogated at high speeds, which is critical to many use cases involving dock doors, portals and conveyors.
Air Interface Protocols
EPCglobal UHF Gen 2, ISO 18000-6b, ISO 18000-6c, Philips Version 1.19, Fairchild G1
Certifications
FCC, ETSI
Frequency Range
865, 869 and 915 MHz
Antenna Ports
Four – Connectors: FCC-Reverse SMA.
Digital I/O
General Purpose Input/Output (GPIO)
Connectivity
Ethernet IPv4 & IPv6
RS232 for configuration
Physical Characteristics
Length : 32.35 cm (12.74″) Width : 22.60 cm (8.90″) Height 8.25 cm (3.25″)
Configuration
Internal web Graphical User Interface (GUI),
General Purpose Input/Output (GPIO),
Four mono-static RF ports
The Intermec IF4 serial reader is the ideal RFID peripheral for applications where an edge server or Programmable Logic Controller (PLC) is used for process control. The IF4 reduces the communications burden on the network and processing demand on the host PLC.
Air Interface Protocols
EPCglobal UHF Gen 2, ISO 18000-6b
Certifications
FCC, ETSI
Frequency Range
ETSI 865-868 MHz, or
FCC 902-928 MHz
Antenna Ports
4 connectors - reverse or standard SMA
Digital I/O
n/a
Connectivity
n/a
Physical Characteristics
Length : 19.1 cm (7.5″) Width : 13.5 cm (5.3″) Height :6.6 cm (2.6″)
The Intermec IF61 smart reader is a powerful combination of reader and network appliance for running RFID applications, delivering faster processing and localized intelligence. Applications written in Java or C# .Net can run directly on the IF61, enabling it to filter, store and manipulate information from tags and send to a server in a required format and eliminating the requirement for a separate industrial PC.
Air Interface Protocols
EPCglobal UHF Gen 2, ISO 18000-6b, ISO 18000-6c, Philips Version 1.19, Fairchild G1
Certifications
FCC, ETSI
Frequency Range
865, 869, 915 and 950 MHz
Antenna Ports
Four mono-static RF ports: FCC -Reverse
SMA.
Digital I/O
General Purpose Input/Output (GPIO)
Connectivity
Ethernet: IPv4 & IPv6, Auto detect and selectable 10-100 Mbps full and half duplex
Optional 802.11 a/b/g Wi-Fi
USB for storage
RS-232 for peripheral devices
Physical Characteristics
Length : 32.4 cm (12.74″) Width : 22.6 cm (8.90″) Height: 10.8 cm (4.25″)
The Intermec IF2 is a compact, cost-effective network reader designed to support diverse RFID applications in both enterprise and industrial environments that require a scalable RFID system with a low cost per read point.
Air Interface Protocols
EPCglobal UHF Class 1 Gen 2
ISO 18000-6B, ISO 18000-6C
Certifications
FCC
Frequency Range
902-928 MHz
Antenna Ports
Four reverse-polarity (RP) TNC ports
Digital I/O
General Purpose Input/Output (GPIO)
Connectivity
10/100 BaseT Ethernet
RS-232, USB for configuration
Physical Characteristics
Length : 18.85 cm (7.42″) Width : 16.31 cm (6.42″) Height : 4.32 cm (1.70″)
Configuration
Universal Plug and Play (UPnP)
Intermec SmartSystems client
Intermec Web Services and Web Configuration Interface
RFID has always delivered the twin conveniences of hands-free scanning with little or no human intervention. Now, Intermec has taken that to the next level by adding the convenience of mobility with the new IV7 Vehicle Mount RFID reader.
Air Interface Protocols
EPCglobal UHF Gen 2, ISO 18000-6b, ISO 18000-6c, Philips Version 1.19, Fairchild G1
Certifications
FCC, ETSI
Frequency Range
865, 869 and 915 MHz
Antenna Ports
4 Antenna Connections
Digital I/O
4 General Purpose Inputs/ 4 Outputs
Connectivity
n/a
Physical Characteristics
Length : 34.3 cm (13.5″) Width : 23.6 cm (9.3″) Height: 9.5 cm (3.75″)
